BKBTD - PROCESS 92BX-NR BLEACH FIX PART A
- MSDS: BKBTD
- Manufacturer: AGFA CORP
- Product Name: PROCESS 92BX-NR BLEACH FIX PART A
- National Stock Number: 6750-00N014037
Product Identification
Product ID:PROCESS 92BX-NR BLEACH FIX PART A
MSDS Date:06/01/1989
FSC:6750
NIIN:00N014037
Kit Part:Y
MSDS Number: BKBTD
Responsible Party
RIDGEFIELD PARK, NJ 07660
US
Emergency Phone: 303-623-5716;800-424-9300(CHEMTREC)
Info Phone: 201-440-2500; 212-971-0260
Cage: HO790
Contractor
Telephone: 210-440-2500
Cage: 59710
Ingredients
THIOSULFURIC ACID, DIAMMONIUM SALT (AMMONIUM THIOSULFATE)
CAS: 7783-18-8
RTECS: XN6465000
Fraction By Weight: 50-55%
SODIUM METABISULFITE
CAS: 7681-57-4
RTECS: UX8225000
Fraction By Weight: 5-10%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
ETHYLENEDIAMINE-TETRAACETIC ACID (EDTA) (SARA III)
CAS: 60-00-4
RTECS: AH4025000
Fraction By Weight: 1-5%
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
AMMONIUM HYDROXIDE (SARA III)
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: 0-1%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: MAY CAUSE IRRITATION.
INHAL: NORMALLY NO PROBLEM, BUT INHALATION OF MIST COULD CAUSE
RESPIRATORY IRRITATION. INGEST: MAY CAUSE IRRITATION OF THE MUCOUS
MEMBRANES OR DIGESTIVE TRACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH WITH PLENTY OF RUNNING WATER FOR AT
LEAST 15 MINUTES. GET MD. SKIN: FLUSH AFFECTED AREAS PROMPTLY WITH
WATER FOR 15 MINUTES. REMOVE CONTAMINATED CLOTHING. IN CASE OF
CONTINUED IRRITATION CONSULT MD. INHAL: FOR OVEREXPOSURE, REMOVE
TO FRESH AIR. INGEST: GET MD IMMEDIATELY.
Fire Fighting
Extinguishing Media:NONCOMBUSTIBLE MATERIAL. ANY MEDIA APPLICABLE TO
PRIMARY CAUSE OF FIRE.
Fire Fighting Procedures:EVACUATE PERSONNEL TO A SAFE AREA. KEEP
PERSONNEL REMOVED AND UPWIND OF FIRE. WEAR A NIOSH/MSHA APPROVED
SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION EMISSION OF
TOXIC FUMES OF SO*2 IS POSSIBLE.
Accidental Release
Spill Release Procedures:USE NIOSH/MSHA APPROVED PERSONAL PROTECTIVE
EQUIPMENT DURING CLEAN UP. DIKE SPILL. PREVENT LIQUID FROM ENTERING
SEWERS, WATERWAYS OR LOW AREAS. SOAK UP WITH SAWDUST, SAND, OIL DRY
OR OTHER ABSORBENT M ATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN WELL VENTILATED AREA. KEEP
CNTNR TIGHTLY CLOSED. DO NOT STORE W/INCOMPAT MATLS. DO NOT STORE
OR CONSUME FOOD, DRINK, TOBACCO IN AREA OF MATL.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:ROOM VENTILATION IS SUFFICIENT. AVOID USE OF PRODUCT IN
UNVENTILATED AREAS.
Protective Gloves:CHEMICAL GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:CHEMICAL APRONS
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
WASTE DISP METH: AND MAY REQUIRE PRETREATMENT. DISPOSE I/A/W FEDERAL,
STATE AND LOCAL REGULATIONS .
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:21.07
Vapor Density:= WATER
Spec Gravity:1.358
pH:5.60
Evaporation Rate & Reference:0.3
Solubility in Water:100%
Appearance and Odor:CLEAR, COLORLESS. AMMONIA ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
ALKALI, STRONG ACIDS, OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SO*X, CO*2, CO
Disposal
Waste Disposal Methods:RECOVER NONUSABLE FREE LIQ AND/OR CONTAM H*2O &
DISP OF IN AN APPRVD/PERMITTED TRTMT SYS. REMOVE NONUSABLE SOLID
MATL AND/OR CONTAM SOIL FOR DISP IN AN APPRVD/PERMITTED LANDFILL.
DISCH TO SEWER REQUIR ES APPROVAL OF PERMITTING AUTH (SEE SUPP
DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.